NFM-20 Series

Non-patient contact medical

General electronics
IT equipment
NFM-15 Series Features
Universal AC input/full range

Ultra low profile
Low leakage current <200uA
No load power consumption <0.75W
Short circuit, OLP, OVP & OTP
Fixed switching frequency at 90KHz
UL60601-1, IEC60601-1 & TUV EN60601-1 medical safety approved
Cooling by free air convection
Part Number Voltage Current (amps) Power (watts)
NFM-20-3-3 3.3V 4.5A 15W
NFM-20-5 5V 4.4A 22W
NFM-20-12 12V 2A 22W
NFM-20-15 15V 1.4A 21W
NFM-20-24 24V 1A 22.08W

Input Voltage                                    85 ~ 264VAC 120 ~ 370VDC

Input Frequency                               47 ~ 440Hz
AC Current                                       0.6A/115VAC 0.4A/230VAC
Inrush Current                                  30A/115VAC 65A/230VAC typically, cold start
Setup, Rise Time                             500ms, 20ms/230VAC 500ms, 20ms/115VAC at                                                                  full load
Holdup Time                                    50ms/230VAC 16ms/115VAC typically at full load
Overload Protection                        Above 105% rated output power
Over Voltage Protection                  Protection type Shut off
Over Temperature Protection         160°C typically (U1) Detect on main control IC
Working Humidity                            20 ~ 90% RH non-condensing
Temperature Coefficient                  ±0.03%/°C (0 ~ 50°C)
Vibration                                          10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each                                                          along X, Y, Z axes
Withstand Voltage                            I/P-O/P:4KVAC I/P-FG:1.5KVAC O/P-FG:1.5KVAC
Isolation Resistance                         I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC

Featuring a low leakage current of 200uA at 264VAC this unit can be equipped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.75W so that it complies with the requirements for “green mode” power supplies. Standard functions include short circuit, over load and over voltage protections and over temperature protection is equipped on the whole NFM series. Suitable for use in general medical or for industrial usage that require low leakage current, general electronic applications and low profile IT equipment these on-board type PSU’s can be applied on the main control PCB of the final systems.