|
Dimensions 100 x 200 x 67 mm |
Features DC input 48V Input and output isolation Soft start function, low inrush current Input under and over voltage protection Over load, over voltage & short circuit protection Built-in long life ball bearing fan 100% 50°C burn-in test Meet Intel ATX 2.01 / ATX2.03 / ATX 12V / EPS UL, cUL, TUV, CB, CE certified |
|
Model No |
Voltage |
Min Load |
Max Load |
Reg |
|
SDX-6400-48 |
3.3V |
0A |
28A |
±5% |
|
|
5V |
2A |
40A |
±5% |
|
|
12V |
1A |
18A |
±5% |
|
|
-5V |
0A |
0.5A |
±5% |
|
|
-12V |
0A |
1A |
+8/-5% |
|
|
5Vsb |
0A |
2A |
±5% |
Specification
Input Voltage 36V ~ 72V DC Typical 48V
Inrush Current <17A @ 36V DC input, full load condition
Efficiency 66%
Max. Power +3.3V & +5V: <200W, -5V & -12V: <12W. Total output:36V~42V: 350W; 43V~72V
Input Protection Ceramic fuse 20A/125V
Overload Protection Over 105% ~ 150% of rating, shutdown. Auto recovery when fault condition been removed
Short Circuit Protection Shutdown. Auto recovery when fault condition removed
Rise Time <20mS
Power Good Signal Power on within 100 ~ 500ms, high level TTL signal release
PS-ON Signal PS-ON high: power Off, PS-ON low: power on
Cooling Two 15CFM (min.) DC ball bearing Fan
Temperature Operating: 0~70°C; De-rating: 45°C ~70°C: 2.5%/°C. Storage: -10~+75°C
Humidity Operating: 20% ~ 85%; Storage: 10% ~ 95% (Non condensing)
Safety UL 1950, CSA C22.2 No. 950, TUV EN 60950, IEC 60950, EMKO-TSE (74-SEC)207/94 Certified
EMC FCC CFR 47 PART 15 CLASS B, EN 50081-1, CNS 13438 CLASS B, EN 50082-1 (1997)
Description
Notes For Table Specification The maximum continuous power for both +3.3V & +5V is 200W. For -5V & -12V it is 12W. Total power for 36V ~ 42V is 350W, and for 43V ~ 72V is 400W.